| |
| |
features |
|
|
| |
›› calibrated in ml/hr
›› flow rates from .017 ml/hr to 24.122 ml/min
›› plastic or glass syringes, 50ml to microliter
›› amluracy within .5%
›› safety—sterile holder, clutch for motor
›› stainless steel & aluminum frame construction
›› operates in any position |
|
|
|
|
model A-DE
(115 Volts/60 Hz) or
(230 Volts/50 Hz) (Specify Country)
|
$689
$719
|
| Two pumps mounted on a common base
with stock synchronous motors and stop switches that disconnects power at end of the syringe. The speed determines the infusion rate for various syringes—see data sheets for the values. |
|
 |
|
|
|
| |
|
|
| |
add-on options |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
MOT-115/60 Hz (Specify Color)
|
$64 |
|
Synchronous motor color specifies speed (see data sheet). The speed determines the infusion rate for various syringes—see data sheets for the values. |
| |
MOT-230/50 Hz (Specify Color)
|
$76 |
|
Synchronous motor color specifies speed (see data sheet) The speed determines the infusion rate for various syringes—see data sheets for the values. |
| |
MOT-Non-Stock (Specify Speed) |
Call |
|
Non-Stock synchronous motor. Specify Speed. The speed determines the infusion rate for various syringes—see data sheets for the values. |
| |
Aml-HP
|
Call |
|
Hospital Grade Plug |
| |
|
|
|
|
| |
specifications |
|
|
|
|
| |
| FLOW RATES: The Model A-DE can accommodate from a 50ml syringe to a microliter syringe, both in plastic and in glass. Listed below are the stock motors, their color code and their corresponding flow rates for a Multifit syringe. Other motor speeds may be specially ordered. To determine flow rates with other syringes, a calibration sheet is included with every pump. |
| |
| |
Syringe Sizes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
MOTOR CODE |
RPM |
1ml |
2ml |
5ml |
10ml |
20ml |
30ml |
50ml |
|
|
|
|
|
|
|
|
|
|
| |
calibrated in ml/min. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GREY |
20.00 |
.688 |
2.446 |
4.236 |
6.612 |
11.789 |
15.814 |
24.122 |
| |
WHT/RED |
15.00 |
.516 |
1.835 |
3.177 |
4.959 |
8.843 |
11.861 |
18.092 |
| |
BLACK |
10.00 |
.344 |
1.223 |
2.118 |
3.306 |
5.895 |
7.907 |
12.061 |
| |
RED |
5.00 |
.172 |
.612 |
1.059 |
1.653 |
2.947 |
3.954 |
6.031 |
| |
PINK |
3.33 |
.115 |
.408 |
.706 |
1.102 |
1.965 |
2.636 |
4.020 |
| |
GREEN |
2.00 |
.069 |
.245 |
.424 |
.661 |
1.179 |
1.581 |
2.412 |
| |
WHT/GRN |
1.50 |
.052 |
.184 |
.318 |
.496 |
.884 |
1.186 |
1.809 |
| |
WHITE |
1.00 |
.034 |
.122 |
.212 |
.331 |
.589 |
.791 |
1.206 |
| |
WHT/BRN |
0.50 |
.017 |
.061 |
.106 |
.165 |
.295 |
.395 |
.603 |
|
|
|
|
|
|
|
|
|
|
| |
calibrated in ml/hr. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
WHITE |
1.000 |
2.063 |
7.339 |
12.708 |
19.854 |
35.369 |
47.443 |
72.367 |
| |
WHT/BRN |
.500 |
1.032 |
3.669 |
6.354 |
9.918 |
17.684 |
23.722 |
36.183 |
| |
BROWN |
.33 |
.688 |
2.446 |
4.236 |
6.612 |
11.790 |
15.814 |
24.122 |
| |
BLUE |
.200 |
.413 |
1.468 |
2.542 |
3.967 |
7.074 |
9.489 |
14.473 |
| |
ORANGE |
.100 |
.206 |
.734 |
1.271 |
1.983 |
3.537 |
4.744 |
7.237 |
| |
WHT/ORG |
.083 |
.172 |
.612 |
1.058 |
1.652 |
2.948 |
3.954 |
6.030 |
| |
WHT/YEL |
.050 |
.103 |
.367 |
.635 |
.992 |
1.768 |
2.372 |
3.618 |
| |
WHT/YEL/BLK |
.042 |
.086 |
.306 |
.529 |
.826 |
1.474 |
1.977 |
3.015 |
| |
YELLOW |
.033 |
.069 |
.245 |
.424 |
.661 |
1.179 |
1.581 |
2.412 |
| |
WHT/PUR |
.022 |
.046 |
.163 |
.282 |
.441 |
.786 |
1.054 |
1.608 |
| |
PURPLE |
.008 |
.017 |
.061 |
.106 |
.165 |
.295 |
.395 |
.603 |
| |
|
|
|
|
|
|
|
|
|
|
| |
|
Selection of required motors should be determined prior to purchase of instruments, but extra motors can be ordered at any time. Motor interchangeability is easily performed by lifting the sliding rear door and removing the electrical connector. No screws to unfasten, no tools are required. Squeezing the jaws will release the grip on the lead screw so that the slide assy can be moved to the rear position. Now the syringe can be placed in the holder and the slide assy moved to the syringe plunger. Holding pump in upright position, rotate the front knob to purge air from the syringe. After attaching the tubing to the syringe, the Model A-DE can be operated by pressing the on/off switch. The front knob can also be rotated to manually infuse liquid.
|
|
Accuracy: .5% accuracy, .5% repeatability.
Pressure limits: Accurate flow up to 10 psi or 540 mm/hg with a 50-60ml syringe; 14 psi or 800 mm/hg with a 30-35ml syringe; 20 psi or 1000 mm/hg with 20ml syringe; 40 psi or 2000 mm/hg with 10ml syringe.
Electrical: 3 wire grounded plug, 30 watts @ 115 volts 50-60 hertz. Less than 25 microamperes current leakage.
Physical: Weight—4 pounds.
Size—3.25" high x 3.25" wide x 9" long.
|
|
| |
|
|
